LS300 3.0mm Automatic CU Purlin Machine

Metoform Tech > CZU Purlin roll forming machine > LS300 3.0mm Automatic CU Purlin Machine

LS300 3.0mm Automatic CU Purlin Machine

Description

LS300 is fully automatic C section steel production equipment, which is mainly composed of the decoiler, feeding and leveling device, pre-punching device, pre-shear, Roll forming machine, Post cutting ,run out table, PLC and Hydraulic station. The web size can be adjusted from 75-300mm any size. The finished products of C-beam rolled by this machine has good bending resistance, good straightness. The machine is automatic length cutting, automatic punching, and easy installation. This product can be used as the main load-bearing structure of large and medium-sized industrial and civil buildings, such as workshops, warehouses, stadiums and other roofing load-bearing and wall leveling support.

enquiry now

Description

Flow chart: Decoiler→ Feeding and leveling →Pre-cutting →Roll forming→ Post punching→ Hydraulic cutting→ product support frame

Product Spec

Machine Specifications

Machine Specifications
Weight	About 8500 KG
Main Machine Size	About 11.5m x1.65m x 1.7m (length x width x height)
Color	Main color: blue
Color	Warning color: yellow and orange
Suitable Raw Material
Material	cold rolled coil , hot rolled coil, galvanized coil
Thickness	1.0-3.0mm
Coil width	According to products size
Yield strength	Q195,Q235,Q345
Main Technical Parameters
Quantity of forming rollers stations	15-16 Stations
Diameter of rollers	ø160MM
Diameter of shafts	ø75/ø80mm
Roll Forming Speed	0-25m/min
Production Speed	12-16m/min(depends on quantity of punching)
Forming rollers material	CR12 mould steel, with quenched treatment
Cutter material	CR12 mould steel, with quenched treatment
Controlling system	PLC and Converter
Electric power requirement	Main motor power: 18.5KW
Electric power requirement	Hydraulic unit motor power: 7.5KW
Electric voltage	According to customers requirement

Main Components

. Mechanical De-coiler
De-coiler Type: by manual
Weight capacity: 4T
2.Feeding and Leveling Device: It used for making the material flat before feeding into the roll forming machine.

3.Pre-shearing
It used to cut raw materials before roll forming.
4.Main roll forming machine
Driven type: By Chains
Speed of forming: 0-25m/min
Working Speed: 12-16m/min
Roller: About 15 groups rollers
Roller Material is Cr12 mould steel;
Shaft: Shafts of rollers are tooled by grinding machine for two times to ensure the precision of final product. Material of main shaft is 40Cr.
Changing sizes: Change sizes automatically by pressing button

5.Post punching device
Punching type: by hydraulic
Punching quantity: total 2sets cylinders 3 or 4holes. (Can be increased by customize)

6. Hydraulic Post- cutting
No need to replace the cutting blades when purlin sizes are changed.

7. Product support frame
8. Control System